Hantek DSO2C10 Digital Oscilloscope 2CH Digital Storage 1GS/s Sampling Rate 100MHz Bandwidth Dual Channel Economical Oscilloscope

$360.53
NONE LEFT IN STOCK
0 watching this item.
0 have this item in their cart.
Product description

Features:


1), 2 channels, each channel has independent knob control;

2), Analog bandwidth 100MHZ

3) The highest sampling rate is 1 GSa/s;

4), The storage depth is 8Mpts;

5), The vertical range of 2mV/div ~ 10V/div;

6) Vertical resolution: 8bit;

7) Trigger: edge, pulse, video, slope, timeout, window, pattern, interval, runt, UART, LIN, CAN, SPI, IIC;

8) Bus decoding and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN;

9), Can save settings, waveforms, reference waveforms, CSV, pictures and other data formats.

10), 3-digit digital voltmeter and 6-digit frequency meter functions;

11) Support 32 kinds of automatic measurement and statistics functions, real-time statistics of minimum, maximum, standard deviation and other statistical information;

12), Two groups of digital voltmeter functions;

13) Support threshold test to realize free measurement in the screen;

14), Rich SCPI remote control instructions;

15). Provide multiple types of peripheral interfaces: USB Host/Device.


Product Model(NOTE:Click on the model to reach the purchase link of the corresponding model)


Model

          Channels

Bandwidth
Sampling Rate
Storage Depth
Signal Source (AWG)

>>DSO2C10<<

2CH

100MHz

1GSa/S 8M /

>>DSO2C15<<

2CH 150MHz 1GSa/S
8M
/

>>DSO2D10<<

2CH+1CH 100MHz 1GSa/S
8M
1CH

>>DSO2D15<<

2CH+1CH
150MHz 1GSa/S
8M
1CH


>>Please Click Here to Download the English User Manual<<


>>Click to Download DSO2000 Software<<


Specification:



model DSO2D15 DSO2D10 DSO2C15 DSO2C10
bandwidth 150MHz 100MHz 150MHz 100MHz
Number of oscilloscope channels 2CH 2CH 2CH 2CH
Built-in signal source 1CH 1CH  -  -
Oscilloscope index
Sampling rate range 1GSa/s (single channel), 500MSa/s (dual channel)
Collection method
sampling Sample data
Peak-to-peak Display high frequency and random glitches
average value Average waveform, times: 4, 8, 16, 32, 64, 128
High precision Up to 12bit
enter
Input coupling DC, AC or ground (DC, AC, GND)
input resistance 1MΩ±2% ‖20pF±3pF
Probe attenuation coefficient setting 1X, 10X, 100X, 1000X
Voltage level 300V CAT II
Maximum input voltage 300VRMS (10X)
Horizontal system
Waveform interpolation (sin x)/x
Maximum record length Maximum 8M per channel
Maximum 4M for dual channels
Horizontal scale range 2ns/div~100s/div 1, 2, 5 steps
Time base mode YT, XY, Roll 
Zero offset ±0.5 div×minimum time base gear
Sampling rate and delay time accuracy ±50ppm
Clock drift ≤±5 ppm/year
Incremental time measurement accuracy Single, "sampled" mode
(Full bandwidth) ±(1 sampling interval+100ppm×reading+0.6ns)
>16 times above average
±(1 sampling interval+100ppm×reading+0.4ns)
Sampling interval = second/div÷200
Vertical system
model DSO2D15 DSO2D10 DSO2C15 DSO2C10
bandwidth 150MHz 100MHz 150MHz 100MHz
Rise time at BNC (typical) 2.3ns 3.5ns 2.3ns 3.5ns
Vertical resolution 8-bit resolution, simultaneous sampling for each channel
Vertical sensitivity 2mV/div to 10V/div
Offset range 2mV/div to 20mV/div, ±100mV; 50mV/div to 200mV/div, ±1V;
500mV / div to 2V / cell, ± 10V; 5V / div to 10V / division, ± 50V
computation Add, subtract, multiply, divide, FFT
FFT Window: Rectangular, Hanning, Hamming, Brackman, Bartlett, flat top window
Bandwidth limit 20MHz
Low frequency response (-3db) ≤10Hz at BNC
Vertical gain accuracy In the "sample" or "average" acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;
In "Sampling" or "Average" acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%
DC offset accuracy ±0.1 div±2 mV±1% offset value
Voltage measurement repeatability, average acquisition mode Under the same settings and environmental conditions, the voltage increment between any two sets of average values ​​of more than 16 waveforms: ±(3%×reading+0.05 division)
Note: The bandwidth is reduced to 6MHz when using X1 probe
Trigger system
Trigger type Edge, pulse, video, slope, timeout, window, pattern, interval, runt, UART, LIN, CAN, SPI, IIC
Trigger level range  ±5 divisions from the center of the screen
Trigger mode Automatic, normal, single
Level CH1~CH2 ±4 divisions from the center of the display
EXT 0~3.3V
Range of relief 8ns~10s
Trigger level accuracy CH1~CH2 0.2 divisions × volts/div within ±4 divisions from the center display
EXT ±(6%+40mV of setting value)
Edge Trigger Slope Rising edge, falling edge, rising edge or falling edge
Source CH1, CH2, EXT
Pulse width trigger polarity Positive polarity, negative polarity
Condition (When) <, >, !=, =
Source CH1~CH2,
Pulse width range 8ns ~ 10s
Precision 8ns
Video trigger Signal standard NTSC, PAL
Source CH1~CH2
Synchronize Scan line, line number, odd field, even field, all field
Slope trigger Slope Rise and fall
Condition (When) <,>, !=, =
Source CH1 ~ CH2
time limit 8ns ~ 10s
Precision 8ns
Timeout trigger Source CH1~CH2,
polarity Positive polarity, negative polarity
time limit 8ns ~ 10s
Precision 8ns
Window trigger Source CH1~CH2 
Pattern trigger Pattern 0: low level; 1: high level; X: ignore; :rising; :falling; :rising or falling
Level (source) CH1~CH2
Interval trigger Slope Rise and fall
Condition (When) <,>, !=, =
Source CH1~CH2,
time limit 8ns ~ 10s
Precision 8ns
Runt trigger polarity Positive polarity, negative polarity
Condition (When) <,>, !=, =
Source CH1~CH2
time limit 8ns ~ 10s
Precision 8ns
UART trigger Condition (When) Start, stop, data, parity, receive error
Source (RX/TX) CH1~CH2 
Data Format Hex (hexadecimal)
Data length 1 byte
Data bit width 5 bit, 6 bit, 7 bit, 8 bit
Parity check None, odd, even
Idle level High, low
Baud rate (optional) 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud rate (custom) 300bit/s~334000bit/s
LIN trigger Condition (When) Interval field, sync field, ID field, sync error, identifier, ID and data
Source CH1~CH2,
Data Format Hex (hexadecimal)
Baud rate (optional) 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud rate (custom) 300bit/s~334000bit/s
CAN trigger Condition (When) Start bit, remote frame ID, data frame ID, frame ID, remote frame data, data frame data, error frame, all errors, response error, overload frame
Source CH1~CH2
Data Format Hex (hexadecimal)
Baud rate (optional) 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
Baud rate (custom) 5kbit/s~1Mbit/s  
SPI trigger Source CH1~CH2,
Data Format Hex (hexadecimal)
Data bit width 4, 8, 16, 24, 32
IIC trigger Source (SDA/SCL) CH1~CH2,
Data Format Hex (hexadecimal)         
Data index 0~7
Timing (condition) Start bits, stop bits, no answer, address, data, reboot
measuring
cursor Voltage difference between cursors△V
Time difference between cursors△T
The reciprocal of △T, in Hertz (1/△T)
Automatic measurement Frequency, period, average value, peak-to-peak value, root mean square, minimum value, maximum value, rise time, fall time, positive pulse width, negative pulse width, bottom value, top value, middle value, amplitude, overshoot , Preshoot, rising edge phase difference, falling edge phase difference, positive duty cycle, negative duty cycle, cycle average, cycle root mean square, falling edge overshoot, rising edge preshoot, BWIDTH, FRF, FFR, LRR , LRF, LFR, LFF
DVM data source CH1, CH2
Measurement type DC effective value
AC effective value
Direct current
frequency meter Hardware 6-digit frequency counter
Signal source indicator
Number of channels 1 channel
Sampling Rate 200MSa/s
Vertical resolution 12 bits 
Highest frequency 25 MHz 
Standard waveform Sine, square wave, pulse, triangle wave, sampling wave, exponential wave, noise
Arbitrary waveform Arb1, Arb2, Arb3, Arb4
Sine Frequency Range 0.1Hz~25MHz
Square wave/pulse Frequency Range 0.1Hz ~ 10MHz
Triangle wave Frequency Range 0.1Hz~1MHz
Sample wave Frequency Range 0.1Hz~1MHz
Exponential wave Frequency Range 0.1Hz~5MHz
noise
Arbitrary Wave 1 Frequency Range 0.1 Hz to 10 MHz 
Arbitrary Wave 2 Frequency Range 0.1 Hz to 10 MHz 
Arbitrary Wave 3 Frequency Range 0.1 Hz to 10 MHz 
Arbitrary Wave 4 Frequency Range 0.1 Hz to 10 MHz 
Wave length 8KSa
frequency Precision 100 ppm (less than 10 kHz) 50 ppm (greater than 10 kHz)
Resolution 0.1 Hz or 4 bits, whichever is greater
Amplitude Output range 10mV~7Vp-p (high impedance)
5mV~3.5Vp-p(50Ω)
DC offset range ±3.5 V, high resistance
±1.75 V, 50 Ω
Resolution 100 μV or 3 bits, whichever is greater
Precision 2% (1 kHz)
Output impedance 50 Ω
General technical specifications
display Display type 7" TFT LCD display diagonally
Display resolution 800 (horizontal) * 480 (vertical) pixels
Display color 16 million colors (24 bit true color)
Afterglow time Minimum value, 1 s, 5 s, 10 s, 30S, unlimited
Display type Point, vector
Display brightness Adjustable
Grid type Optional
Grid brightness Adjustable
interface Standard interface USB Host, USB Device
General technical specifications Probe compensator output
Output voltage, typical About 2Vpp input ≥1MΩ load
Frequency, typical 1kHz
voltage 100-120VAC RMS (±10%), 45Hz to 440Hz, CATⅡ
120-240VAC RMS (±10%), 45Hz to 66Hz, CATⅡ
Power consumption Less than 30W
Fuse T, 3.15A, 250V, 5x20mm
Operating temperature 0~50 °C (32~122 °F)
storage temperature -40~+71 °C (-40~159.8 °F)
humidity ≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Altitude When operating and not operating 3,000m (10,000 feet)
Mechanical shock Random vibration 0.31g RMS from 50Hz to 500Hz ,
10 minutes per axis
When not operating 2.46g RMS from 5Hz to 500Hz ,
10 minutes per axis
During operation 50g, 11ms, half sine wave
Mechanical part Oscilloscope size 318 x 140 x 150mm (length x width x height)
weight

2900g

 

Package includes:


1 X Hantek DSO2C10 Digital Oscilloscope


Details pictures: 




Check this out

+
Total price: $0.00
Afterpay American Express Apple Pay Bitcoin Dankort Diners Club Discover Dogecoin Dwolla Forbrugsforeningen Google Pay iDEAL JCB Klarna Litecoin Maestro Mastercard PayPal Shop Pay SOFORT Visa